Practical ideas from FARM SHOW MagazineSubscribe · Free issue · Send us your shop tip
Subscribe to FARM SHOW
Home / Vol. 26, No. 6 (2002)

Dale Conrady

Dale Conrady, Hettick, Ill.

“I needed to pull a pilot bearing out of the engine in my Deere 2020 tractor, but I didn’t have the special tool that’s normally used for this kind of job. I came up with a quick fix by grinding down part of a 3/8-in. dia. bolt just below the head, leaving a square ‘shoulder’ that hooks onto the bearing. Then I screwed a nut and washer onto the other end of the bolt. By grabbing the nut and washer with a crowbar I was able to pull the bearing out.”

Reproduced from the published FARM SHOW entry. Prices, coupons, availability and contact details are historical, not current offers. Reader methods are not universal instructions: follow manufacturer guidance, proper supports and safety practices, and consult a qualified professional when needed.

Comments and votes

Have you tried this idea? Mark it helpful and share how it worked in your shop.