“When I bought a used Ford 9N tractor, it was equipped with a pto-driven hydraulic pump. I wanted the tractor to have two hydraulic systems so I installed a power steering pump that’s belt-driven off the tractor’s alternator. I made a double pulley out of piece of aluminum and put two different size grooves in it - a 5/8-in. wide one for the alternator belt and a 1/2-in. wide one for the power steering pump.
“I also installed a selector valve between the original valve and the tractor ’s 3-pt. lift cylinder. The selector valve allows me to switch between using the 3-pt. hitch or the tractor’s hydraulic outlets. I use the pto-driven pump to operate my log splitter and the power steering pump to operate a front-mount snowplow. That way when I push the clutch in I don’t have to worry about killing the hydraulics to whatever implement I’m using. I also use the pto-driven pump to operate the 3-pt. lift cylinder and a boom. I mounted a pilot-operated check valve on the head end of the cylinder so if a hose breaks or a valve leaks, the cylinder stays put.
Reproduced from the published FARM SHOW entry. Prices, coupons, availability and contact details are historical, not current offers. Reader methods are not universal instructions: follow manufacturer guidance, proper supports and safety practices, and consult a qualified professional when needed.
Comments and votes
Have you tried this idea? Mark it helpful and share how it worked in your shop.