Practical ideas from FARM SHOW MagazineSubscribe · Free issue · Send us your shop tip
Subscribe to FARM SHOW
Home / Vol. 26, No. 5 (2002)

David Gaskell

David Gaskell, Horton, Kan.

“I developed this adjustable roller stand for use in moving material into and out of a power saw. Multiple roller stands can be used as needed, depending on what you’re cutting. I made it from an old trailer jack. I first cut it down to the right length, and then welded it to a used 20-in. truck rim. A 16-in. roller attaches to the top. With a turn of the crank, a full load of materials can be adjusted to the desired height. Very handy.”

Reproduced from the published FARM SHOW entry. Prices, coupons, availability and contact details are historical, not current offers. Reader methods are not universal instructions: follow manufacturer guidance, proper supports and safety practices, and consult a qualified professional when needed.

Comments and votes

Have you tried this idea? Mark it helpful and share how it worked in your shop.