Practical ideas from FARM SHOW MagazineSubscribe · Free issue · Send us your shop tip
Subscribe to FARM SHOW
Home / Vol. 26, No. 5 (2002)

Dan Krenzel

Individual tip 2 of 2 from this reader’s published contribution.
Dan Krenzel, Cullman, Ala.

“I have a lot of small engines to keep tuned and I came up with an idea that saves a lot of neck bending and frustration. When I set the idler and gas needle valves, I always leave the set screw so the slot in the screw head is straight up and down. It sure makes a difference when I have to readjust since I know just how to insert the screw driver blade without searching for the slot. And the 1/4 turn from any position to straight up and down doesn’t make any significant difference in how the engine runs.”

Reproduced from the published FARM SHOW entry. Prices, coupons, availability and contact details are historical, not current offers. Reader methods are not universal instructions: follow manufacturer guidance, proper supports and safety practices, and consult a qualified professional when needed.

Comments and votes

Have you tried this idea? Mark it helpful and share how it worked in your shop.