Practical ideas from FARM SHOW MagazineSubscribe · Free issue · Send us your shop tip
Subscribe to FARM SHOW
Home / Vol. 25, No. 6 (2001)

Steve Spiering

Steve Spiering, Milbank, S. Dak.

“I used a length of 2-in. dia. PVC tubing to make a vacuum nozzle that hooks up to my shop vac. It works great for cleaning out leftover seed in my drill fill auger. I used an electric heat gun to heat one end of a 1-ft. length of tubing until it started to get soft, and then squeezed it between two boards to flatten it out, leaving a narrow opening. Then I heated the other end of the pipe and inserted the vacuum hose. When the pipe cooled off, I had a tight fit. I also use it to clean out grain from under the aeration floor in my grain bin. You could make the pipe as long as you need.”

Reproduced from the published FARM SHOW entry. Prices, coupons, availability and contact details are historical, not current offers. Reader methods are not universal instructions: follow manufacturer guidance, proper supports and safety practices, and consult a qualified professional when needed.

Comments and votes

Have you tried this idea? Mark it helpful and share how it worked in your shop.