Practical ideas from FARM SHOW MagazineSubscribe · Free issue · Send us your shop tip
Subscribe to FARM SHOW
Home / Vol. 25, No. 4 (2001)

Wallace A. Johnson

Wallace A. Johnson, New Ulm, Minn.

“I came up with a way to stop denting the side of my car while opening car doors in a double car garage. I used about 14 ft. of 3/4-in. dia. PVC pipe, two 3/4-in. dia. elbows, and two 3/4-in. dia. caps. Using a 3/4-in. dia. masonary drill bit, I drilled two holes in the cement floor 8 ft. apart midway between the cars. I also drilled holes through the caps and used masonary screws to fasten both caps to the floor. Then I secured two 33-in. long PVC uprights to the floor and placed the elbows on the uprights, then pushed an 8-ft. length of PVC pipe horizontally into the caps. If you open a car door and it hits the pipe, the pipe will give and then return to its former place once the door has been closed. The cost for materials was less than $10.”

Reproduced from the published FARM SHOW entry. Prices, coupons, availability and contact details are historical, not current offers. Reader methods are not universal instructions: follow manufacturer guidance, proper supports and safety practices, and consult a qualified professional when needed.

Comments and votes

Have you tried this idea? Mark it helpful and share how it worked in your shop.