Practical ideas from FARM SHOW MagazineSubscribe · Free issue · Send us your shop tip
Subscribe to FARM SHOW
Home / Vol. 25, No. 3 (2001)

John Haldemann

John Haldemann, Chinook, Montana

“My Hesston stack mover was great for hauling hay, except when the terrain was a little rugged or rocky, as it is on much of my ranch. The stack mover tended to bounce and shake when there was no load on it, and when it was loaded, it had very little flex, so we had to go slow with it. To help it handle our terrain better and enable us to pull it faster, we removed the original walking beam axles and replaced them with the axles and suspension from a new 10-ton trailer. The springs really made a difference. Now it handles loads better at higher speeds.

“Replacing the original axles with the trailer axles was simple. It did raise the bed of the stack mover and the feeder about two inches, but that really hasn’t made a difference in loading or unloading stacks.”

Reproduced from the published FARM SHOW entry. Prices, coupons, availability and contact details are historical, not current offers. Reader methods are not universal instructions: follow manufacturer guidance, proper supports and safety practices, and consult a qualified professional when needed.

Comments and votes

Have you tried this idea? Mark it helpful and share how it worked in your shop.