Practical ideas from FARM SHOW MagazineSubscribe · Free issue · Send us your shop tip
Subscribe to FARM SHOW
Home / Vol. 25, No. 3 (2001)

Ezra C. Gilliam

Ezra C. Gilliam, Salisbury, N.C.

“When sharpening my chain saw I often find it difficult to determine where I started sharpening and where I should stop. To solve the problem I tie a piece of thread around the chain at the point where I start sharpening and then proceed to sharpen each tooth until I reach the thread again.”

Reproduced from the published FARM SHOW entry. Prices, coupons, availability and contact details are historical, not current offers. Reader methods are not universal instructions: follow manufacturer guidance, proper supports and safety practices, and consult a qualified professional when needed.

Comments and votes

Have you tried this idea? Mark it helpful and share how it worked in your shop.