Practical ideas from FARM SHOW MagazineSubscribe · Free issue · Send us your shop tip
Subscribe to FARM SHOW
Home / Vol. 24, No. 4 (2000)

Randy Althouse

Individual tip 2 of 2 from this reader’s published contribution.
Randy Althouse, Castalia, Iowa

“I also used junk steel and a length of heavy duty well pipe to build my own two-wheeled, pressurized sand blaster. I closed up each end of the pipe. Then I welded an adapter onto the top end of the pipe and welded a valve onto the side. I also welded on an air hose hookup at the bottom of the pipe, where the sand comes out. A 5-ft. long steel rod equipped with a ceramic nozzle hooks up to the air hose. A black toilet paper canister hooks up to the hose and serves as a filter. It absorbs any moisture in the air hose so it won’t plug up with sand.

“To operate the sandblaster I first remove a cap at the top of the pipe and use a funnel to pour sand into the opening. Then I hook up my air compressor hose to an in-line valve on the canister that’s used to turn the sandblaster on. The 5-ft. wand is long enough to keep me from getting pelted with sand.

“I built it five years ago and have already run four or five tons of sand through it. It holds about twice as much sand as most commercial models so I don’t have to always stop and refill. I can go for about a half hour before it runs out of sand. It cost about $10 to build whereas commercial models sell for $200 or more.”

Reproduced from the published FARM SHOW entry. Prices, coupons, availability and contact details are historical, not current offers. Reader methods are not universal instructions: follow manufacturer guidance, proper supports and safety practices, and consult a qualified professional when needed.

Comments and votes

Have you tried this idea? Mark it helpful and share how it worked in your shop.