“Using mostly junk steel, I built my own portable, heavy-duty 20-in. dia. chop saw that’s powered by a 5 hp electric motor. The motor belt-drives the blade.
“The chop saw mounts on four wheels and weighs about 300 lbs. It has more power and can cut through bigger material than most commercial models. The machine will cut right through a 10 by 13-in. piece of steel, and I made it big enough that I can use a bigger 26-in. dia. blade if I want. I used 8-in. channel iron to build a pivoting arm that supports the motor and saw arbor. A threaded lever is used to tighten the vice to hold material in place. Pulling down on another lever brings the blade into the material for cutting. I built it so that the 3-ft. sq. work table is a little taller than my shop workbenches. As a result, I can cut a 20-ft.
long piece and keep the material above the work bench.
“I already had the motor and control box and bought a new blade. My total cost was about $100, whereas most commercial models sell for about $300.
Reproduced from the published FARM SHOW entry. Prices, coupons, availability and contact details are historical, not current offers. Reader methods are not universal instructions: follow manufacturer guidance, proper supports and safety practices, and consult a qualified professional when needed.
Comments and votes
Have you tried this idea? Mark it helpful and share how it worked in your shop.