Practical ideas from FARM SHOW MagazineSubscribe · Free issue · Send us your shop tip
Subscribe to FARM SHOW
Home / Vol. 24, No. 4 (2000)

Hubert Dyson

Hubert Dyson, Vilonia, Ark.

“I used 12-in. steel I-beams to build my own 40-ton hydraulic press. It has a 5-ft. wide opening from post to post and stands about 10 1/2 ft. high. The cylinder has a 2-ft. long stroke and is made from a length of 7-in. dia., 1/2-in. wall tubing off an old forklift. The press stands outside my shop because it was too big to fit inside it. I operate a small machine shop and use my press to build or repair things for my customers. It can do everything from small to big jobs – the biggest metal I’ve bent was 1 3/4 in. thick.

“The legs have steel plates welded to them at the bottom and are simply buried in the ground. The cylinder is operated by a small hydraulic pump and an electric motor.”

Reproduced from the published FARM SHOW entry. Prices, coupons, availability and contact details are historical, not current offers. Reader methods are not universal instructions: follow manufacturer guidance, proper supports and safety practices, and consult a qualified professional when needed.

Comments and votes

Have you tried this idea? Mark it helpful and share how it worked in your shop.