Practical ideas from FARM SHOW MagazineSubscribe · Free issue · Send us your shop tip
Subscribe to FARM SHOW
Home / Vol. 24, No. 3 (2000)

Bob White

Bob White, South Euclid, Ohio

“I’ve got the slickest little trick for mounting tubeless tires. After trying every thing I could think of to get beads to seal, I came up with this idea. It works every time and costs nothing.

“After slipping the tire onto the rim, I ‘snug’ the bead on the side that’s opposite the valve stem. You don’t have to seal that side. I just fit it snuggly to the rim with a couple pulls.

“Then I flip the tire over onto some supports. I use a couple pieces of 4 by 4’s or a couple tires. The supports hold the sides of the tire as you push down on the rim. It only takes a couple of pounds of force to push the rim down enough to close the bead gap. While I hold the rim down with my left hand, I apply shop air with my right to seat the bead. To make it seat faster, I take the valve stem out to reduce restriction in the air flow. This technique has never failed me and no special tools are required. Takes only about 30 seconds.”

Reproduced from the published FARM SHOW entry. Prices, coupons, availability and contact details are historical, not current offers. Reader methods are not universal instructions: follow manufacturer guidance, proper supports and safety practices, and consult a qualified professional when needed.

Comments and votes

Have you tried this idea? Mark it helpful and share how it worked in your shop.