“If you normally throw away cutting tips for your oxy-fuel torch because the copper seating rings are damaged, you’ll like my new tool. It accurately refaces the bad rings to return the tip to safe, useable condition in minutes, saving you a lot of time and money.
“Designed for all Victor series cutting tips, ‘Neet Seet’ tool consists of a 7/8-in. dia. by 7/8-in. long solid piece of steel bored to a specific angle that exactly fits the angle of the tip seat. The inside of the tool is uniformly coated with a permanently bonded diamond abrasive to make it virtually indestructible and self-cleaning.
“To use, insert the tool into the cutting tip seating and turn it on the tip seats using firm pressure. Repeat until the seats are clean.
“Refaced seat rings ensure against back-flash and fire around the nut that are hazardous and can be caused by something as in-significant as rattling around in a tool box.”
Sells for $24.75, including S&H. Contact: FARM SHOW Followup, CW Engineered Products, P.O. Box 681, Libby, Mont. 59923 (ph 406 293-6712; fax 9014).
Reproduced from the published FARM SHOW entry. Prices, coupons, availability and contact details are historical, not current offers. Reader methods are not universal instructions: follow manufacturer guidance, proper supports and safety practices, and consult a qualified professional when needed.
Comments and votes
Have you tried this idea? Mark it helpful and share how it worked in your shop.