Practical ideas from FARM SHOW MagazineSubscribe · Free issue · Send us your shop tip
Subscribe to FARM SHOW
Home / Vol. 23, No. 3 (1999)

Ronald J. Fitzgerald

Ronald J. Fitzgerald, Seely’s Bay, Ont.

Ronald’s come up with a foolproof way to remove bolts that break off flush, such as broken bolts in engine blocks.

“I take a nut the same size as the broken bolt and hold it over the bolt with a pliers. Then I take my MIG welder and weld the hole in the nut full, heating the nut red hot. When you’re finished, just as the color’s going out of the nut, take a wrench and turn out the bolt by the nut. It’ll work every time, guaranteed.

“In cases where you’re concerned the weld will stick to the surface around the broken bolt, first place a brass or copper washer over the broken bolt end and apply a wee bit of weld to build it up. Then use the same procedure described above.

“I’ve removed broken bolts this way ever since I got my first MIG welder years ago. It’s never failed.”

Reproduced from the published FARM SHOW entry. Prices, coupons, availability and contact details are historical, not current offers. Reader methods are not universal instructions: follow manufacturer guidance, proper supports and safety practices, and consult a qualified professional when needed.

Comments and votes

Have you tried this idea? Mark it helpful and share how it worked in your shop.