Practical ideas from FARM SHOW MagazineSubscribe · Free issue · Send us your shop tip
Subscribe to FARM SHOW
Home / Vol. 23, No. 3 (1999)

Floyd Lebold

Floyd Lebold, Exeter, Maine

When the 28-in. rims on Floyd’s 1958 Allis D17 began to rust out, he modified them with a pair of 30-in. rims he’d had on an Allis 175.

“I cut the front edge of the flange of the 28-in. rim down until it matched up with the bottom edge of the 30-in. rim. I welded all the way around both sides of the rims. It’s a cheap way to get ‘new’ rims and increase tire size on your tractor. I went from 14.9 by 28-in. tires to 16.9 by 30-in. tires, which increases ballasting capacity and traction and improves stability.”

Reproduced from the published FARM SHOW entry. Prices, coupons, availability and contact details are historical, not current offers. Reader methods are not universal instructions: follow manufacturer guidance, proper supports and safety practices, and consult a qualified professional when needed.

Comments and votes

Have you tried this idea? Mark it helpful and share how it worked in your shop.