Practical ideas from FARM SHOW MagazineSubscribe · Free issue · Send us your shop tip
Subscribe to FARM SHOW
Home / Vol. 23, No. 2 (1999)

Jim House

Jim House, Aberdeen, Wash.

“A big problem with chain saws is that vibration often causes the screws to shake out of the cover. There are 15 or 20 screws on most saws so it can be a real problem. Over the years I’ve tried using lock washers but they didn’t hold. You can use Locktite, but then you can’t remove the screw if you need to.

“I finally discovered an easy solution. Re-move the screws and wrap 1/2 in. wide nylon tape (the type used for plumbing) around them, then screw them back on. The tape holds the screw tight. You can still remove the screws if you ever have to repair the saw.”

Reproduced from the published FARM SHOW entry. Prices, coupons, availability and contact details are historical, not current offers. Reader methods are not universal instructions: follow manufacturer guidance, proper supports and safety practices, and consult a qualified professional when needed.

Comments and votes

Have you tried this idea? Mark it helpful and share how it worked in your shop.