Practical ideas from FARM SHOW MagazineSubscribe · Free issue · Send us your shop tip
Subscribe to FARM SHOW
Home / Vol. 23, No. 2 (1999)

Bill Reeks

Bill Reeks, Cromwell, Ky.

“Small floor jacks like you buy at Wal-Mart or Sears are cheap ($19.95) and really well-built. But you always have to remove the handle to activate the valve that raises and lowers the jacks, and that’s a real pain.

“To make them easier to use, I slipped a metal washer with 1/2-in. dia. center hole into the slot where the handle goes. I used J-B Weld to hold the washer in place. The washer acts like a key in a door to close and open the valve. Once the washer is installed, you can bolt or tape the handle permanently in place so you can pull the jack all over your shop without having the handle come off.”

Reproduced from the published FARM SHOW entry. Prices, coupons, availability and contact details are historical, not current offers. Reader methods are not universal instructions: follow manufacturer guidance, proper supports and safety practices, and consult a qualified professional when needed.

Comments and votes

Have you tried this idea? Mark it helpful and share how it worked in your shop.