Practical ideas from FARM SHOW MagazineSubscribe · Free issue · Send us your shop tip
Subscribe to FARM SHOW
Home / Vol. 23, No. 2 (1999)

Gary Max Busler

Gary Max Busler, Blaine, Tenn.

Gary had problems from the get-go with an early 1980’s Deere 510 baler he bought used three years ago.

“The belts would cross and lock up in the front of the baler when I started to make a core in light hay. I had to stop, pull out the hay and uncross the belts whenever I started to make a core in light hay, which got extremely aggravating in short order.

“To solve the problem, I made a guide for the belts to run in. I cut a 10-ft. long highway stop sign post. I used the round bushings out of a GM car’s brake calipers as spacers between the two sections of sign posts, which keeps them 2 or 3 in. apart. To install the guide, I placed one section of pipe on one side of the belts, then bolted the other section of pipe to it. I bolted the assembly horizontally into the baler just above the roller.

“I haven’t had a problem with belts crossing since. The biggest expense was $25 for the bolts I used, with all other components coming from scrap I had on hand.”

Reproduced from the published FARM SHOW entry. Prices, coupons, availability and contact details are historical, not current offers. Reader methods are not universal instructions: follow manufacturer guidance, proper supports and safety practices, and consult a qualified professional when needed.

Comments and votes

Have you tried this idea? Mark it helpful and share how it worked in your shop.