Practical ideas from FARM SHOW MagazineSubscribe · Free issue · Send us your shop tip
Subscribe to FARM SHOW
Home / Vol. 22, No. 6 (1998)

Roger and Bruce Elliott

Individual tip 1 of 2 from this reader’s published contribution.
Roger and Bruce Elliott, Montrose, Ill.

“To get more light in our shop exactly where we want it, we hung garage door tracks above our lathe and milling machines. We welded two pieces of track together end to end to make a 16-ft. long track. Then we attached 6-in. rods - bent at a 90 degree angle - to the door rollers. Then we mounted hooks on the rods and attached a 4-ft. long shop light. We also welded a piece of strap iron between the rollers to keep them in line. The light simply rolls back and forth on the track.

Reproduced from the published FARM SHOW entry. Prices, coupons, availability and contact details are historical, not current offers. Reader methods are not universal instructions: follow manufacturer guidance, proper supports and safety practices, and consult a qualified professional when needed.

Comments and votes

Have you tried this idea? Mark it helpful and share how it worked in your shop.