Practical ideas from FARM SHOW MagazineSubscribe · Free issue · Send us your shop tip
Subscribe to FARM SHOW
Home / Vol. 22, No. 3 (1998)

Jack Dyck

Individual tip 1 of 2 from this reader’s published contribution.
Jack Dyck, Richmond, B.C.

“I built my own pto-driven air compressor by mounting a right angle gearbox and pulley unit - salvaged from an old tractor- on a steel bracket that I bolted onto a 200-gal. air tank. I also mounted a used compressor equipped with its own pulley on the bracket. I use a tractor to pto-drive the gearbox which belt-drives the compressor. The compressor blows air through a copper tube that goes through the bracket and into the tank. The original pulley on the gearbox was designed for a flat belt. I replaced it with a bigger 2-groove pulley, using an adapter to install it.

“I work part time for a construction business and got the idea while working at a place that had no electricity. I was given the compressor and found the tank alongside a road. I made an adjuster that lets me move the bracket back and forth to tighten the belt.

Reproduced from the published FARM SHOW entry. Prices, coupons, availability and contact details are historical, not current offers. Reader methods are not universal instructions: follow manufacturer guidance, proper supports and safety practices, and consult a qualified professional when needed.

Comments and votes

Have you tried this idea? Mark it helpful and share how it worked in your shop.