Practical ideas from FARM SHOW MagazineSubscribe · Free issue · Send us your shop tip
Subscribe to FARM SHOW
Home / Vol. 22, No. 3 (1998)

Karl Plesums

Individual tip 2 of 2 from this reader’s published contribution.
Karl Plesums, Spooner, Wis.

“Three years ago, on the coldest day of winter, I also came up with an easy way to unplug Big Jim silo unloader chutes. Dad had accidentally plugged the hole down to the bottom conveyor with a frozen chunk of silage. I spent about four hours trying to poke a hole through the mess but to no avail.

“I finally decided to try an ice-type auger. I welded a 2-ft. length of 4-in. dia. flighting to a piece of 3/4-in. dia. black pipe. I used a small pipe wrench to screw the auger through the plug up. It took only about 15 minutes to unplug the mess.

“Incidentally, you can bolt several sections of black pipe to the auger to go through deeper plugs. I’ve since used this to unplug 25 ft. of haylage in about 20 minutes.”

Reproduced from the published FARM SHOW entry. Prices, coupons, availability and contact details are historical, not current offers. Reader methods are not universal instructions: follow manufacturer guidance, proper supports and safety practices, and consult a qualified professional when needed.

Comments and votes

Have you tried this idea? Mark it helpful and share how it worked in your shop.