Practical ideas from FARM SHOW MagazineSubscribe · Free issue · Send us your shop tip
Subscribe to FARM SHOW
Home / Vol. 22, No. 3 (1998)

Brian R. Hebden

Brian R. Hebden, Springville, N.Y.

“I have easy access to my tools thanks to this pull-out tool tray which I built into the back of my pickup. The tray slides in and out of the bed. I used 2 by 4’s and a sheet of 4 by 8-ft. plywood to make the tray. Garage door hangers and caster wheels underneath the tray make the tray easy to roll out. I installed hold-down rails on the wheel wells or a center-mounted leg to keep the tray from tipping whenever it’s pulled out. At the job site I simply open the pickup’s tailgate and pull the tray out. The tools are easy to reach from all sides.”

Reproduced from the published FARM SHOW entry. Prices, coupons, availability and contact details are historical, not current offers. Reader methods are not universal instructions: follow manufacturer guidance, proper supports and safety practices, and consult a qualified professional when needed.

Comments and votes

Have you tried this idea? Mark it helpful and share how it worked in your shop.