Practical ideas from FARM SHOW MagazineSubscribe · Free issue · Send us your shop tip
Subscribe to FARM SHOW
Home / Vol. 21, No. 3 (1997)

VW Engine Great For Repowering Bobcat

Featured source:

After years of hard use with little need for repair, Ralph Johnson’s Bobcat 500 skid steer loader needed engine repair.

“It would have cost more than $1,000 for labor and parts to repair the 2-cylinder Kohler engine,” says the Michigan farmer.

“I looked around at small engines about the same size and found that a Volkswagen engine from a Jetta car would fit perfectly. A Volkswagen engine operates at about 100 psi oil pressure so any engine you find in a junkyard is likely to be in good condition. The valves might need grinding, but that’s about all.

“Fitting the engine into the cavity of the machine was a logical process. The most difficult part was making an adapter to fit the pulley onto the crankshaft. I made four adapters before I was satisfied that I had a perfect fit. The adapter to run the hydraulics on the opposite side of the engine was simple to do.

“I’ve used the repowered Bobcat for a year now with no problems. I could have installed a governor but I chose to put a choke cable on that’s attached to the carburetor. I ran the cable up through the steering lever so the choke button is on top of the steering arm. So as I work the steering I can control engine speed at the touch of my thumb.

“Any belt-driven Bobcat could use this engine. The 4-cyl. VW puts out over 57 hp, which is considerably more than the original Kohler. The engine is water-cooled and the radiator is about the same width as the Bobcat. I put a hinged frame on back to hold the radiator and to open the back of the motor compartment for service.

“The cost of the engine was about $200. I could build the crankshaft adapter for sale if there’s interest, or make blueprints available.”

Contact: FARM SHOW Followup, Ralph F. Johnson, 4597 Sunflower Ridge Dr., Ada, Mich. 49301 (ph 616 874-6827).

Reproduced from the published FARM SHOW entry. Prices, coupons, availability and contact details are historical, not current offers. Reader methods are not universal instructions: follow manufacturer guidance, proper supports and safety practices, and consult a qualified professional when needed.

Comments and votes

Have you tried this idea? Mark it helpful and share how it worked in your shop.