Practical ideas from FARM SHOW MagazineSubscribe · Free issue · Send us your shop tip
Subscribe to FARM SHOW
Home / Vol. 21, No. 3 (1997)

Don Voss

Don Voss, Spiritwood, Sask.

“To re-pair combine pickup rollers, round baler rollers, Hesston straw chopper rotors, and any other rollers that have shafts with only one washer supporting the end, we’ve come up with a handy repair. We install two washers inside each end of the roller, with one at the end and the other a couple inches inside the tube. We weld the washers to the shaft, then machine them in the lathe for a tight fit inside the tube. Makes them a lot stronger. For example, Hesston choppers get out of balance when the single washer bends slightly. We can save these expensive rotors with this simple repair.”

Reproduced from the published FARM SHOW entry. Prices, coupons, availability and contact details are historical, not current offers. Reader methods are not universal instructions: follow manufacturer guidance, proper supports and safety practices, and consult a qualified professional when needed.

Comments and votes

Have you tried this idea? Mark it helpful and share how it worked in your shop.