If you’ve seen the tractor repair videos FARM SHOW sells, you’re already familiar with Dan’s work on older tractors. He says he’s also had a lot of interest in his method of boosting power on later model Deere 4020 diesels. He increases horsepower from 90 to as much as 150 so the repowered rigs are roughly equivalent to a 4440.
“We first install a turbocharger on the 4020. I use only M&W T-34 turbocharger kits because of the unit’s reliability and the company’s reputation for customer service.
These kits can be installed on any Deere 4020, Serial No. 250,000 or higher, which indicates the tractor has the C.A.V. fuel pump for which this kit is designed. You have to remove the original exhaust manifold to install the kit, a simple procedure if you follow the instructions provided.
“If you go by the book, you’ll have no trouble attaining a 20 to 30 percent increase in power, up to about 125 hp. Installation takes as little as a half hour.
“If you want to spend another half-day of very careful fuel pump adjustment, you can coax even more power out of the unit, although you’ll void the warranty on the unit by doing so. However, we’ve discovered that the 4020 can easily handle the increased power placed on it by this method.
“First, follow the company’s guidelines on adjusting the fuel pump. Instead of tightening or loosening the screw opposite the notch in the fuel adjustment ring 1/16 of an inch, you can actually turn it closer to 1/8 of an inch to get a boost in power of up to 150 hp. That takes some doing and very close attention to how black the exhaust smoke is. If smoke is really black, you’ll have to back down the adjustment screw a bit.
“A word of caution: Installing the kit and making this fuel pump adjustment puts a good deal of additional stress on the rear end of the tractor so don’t go out, put on duals and expect to pull huge loads you couldn’t before. If you do, you’ll simply tear up the ring and pinion gear. But if you just use the tractor the way you did before, you’ll enjoy the extra power and ease of handling without doing any damage.”
M&W turbo kits retail for $1,760. For the dealer nearest you, contact: Herschel-Adams, 1301 North 14th St., Indianola, Iowa 50125 (ph 800 247-2167 or 515 961-7481).
Reproduced from the published FARM SHOW entry. Prices, coupons, availability and contact details are historical, not current offers. Reader methods are not universal instructions: follow manufacturer guidance, proper supports and safety practices, and consult a qualified professional when needed.
Comments and votes
Have you tried this idea? Mark it helpful and share how it worked in your shop.