Practical ideas from FARM SHOW MagazineSubscribe · Free issue · Send us your shop tip
Subscribe to FARM SHOW
Home / Vol. 21, No. 1 (1997)

Rodger Parmelee

Rodger Parmelee, Valier, Mont.

“I made a ‘sizer’ to mount on the side of my cut-off saw that saves a lot of time when cutting several pieces the same length. It slides back and forth on a piece of pipe that sticks out from the side of the saw table. A locking collar holds the ‘ear’ in place. You measure the desired length with the ear up, then turn the ear down out of the way before cutting so material that’s being cut does not bind. Then turn the ear up for the next piece. It will cut lengths up to 3 ft. long. When not in use, it is completely out of the way. I’ve been making these for sale for $30 to fit any cut-off saw with two bolts. Contact: Rodger Parmelee, Box 155, Valier, Mont. 59486 ph 406 279-3516.”

Reproduced from the published FARM SHOW entry. Prices, coupons, availability and contact details are historical, not current offers. Reader methods are not universal instructions: follow manufacturer guidance, proper supports and safety practices, and consult a qualified professional when needed.

Comments and votes

Have you tried this idea? Mark it helpful and share how it worked in your shop.