Melvin’s come up with a slick way to convert old AC welders, ranging in size from 0 to 500 amps, to DC to reduce splatter and get more penetration with a smoother weld.
“I’ve converted my three Lincoln TM 300’s as well as a couple of my neighbors’ Lincoln 225’s,” he says.
“I make a box out of 3/8-in. thick plate steel that attaches to the bottom of the welder and houses the new components. It has caster wheels so you can roll the welder around.
“I install four 500 amp diodes (smaller ones would probably work, too) to make a bridge diode. It mounts on an aluminum heat sink to keep it cool. I insulate the heat sink from the welder’s frame with insulating board or rubber. I insert a current stabilizer on the negative line to smooth out the flow of current.
“I make conversion kits for $225 FOB.” Contact: Melvin Carlson, Mortgage Hill Farm, Box 66, Buffalo, Kan. 66717 (ph 316 537-6590).”
Reproduced from the published FARM SHOW entry. Prices, coupons, availability and contact details are historical, not current offers. Reader methods are not universal instructions: follow manufacturer guidance, proper supports and safety practices, and consult a qualified professional when needed.
Comments and votes
Have you tried this idea? Mark it helpful and share how it worked in your shop.