Practical ideas from FARM SHOW MagazineSubscribe · Free issue · Send us your shop tip
Subscribe to FARM SHOW
Home / Vol. 21, No. 1 (1997)

W.A. Gibbs

Individual tip 2 of 2 from this reader’s published contribution.
W.A. Gibbs, Elmwood, Tenn.

“I also built this drill press out of scrap steel, using a jack with a bad shaft. I mounted it in a channel iron and flat steel frame about 5 ft. tall. I use it for many small jobs, such as pressing bearings onto shafts. Press height is adjustable from about 1 ft. to 4-ft. It only cost about $20 to build and works great.”

Reproduced from the published FARM SHOW entry. Prices, coupons, availability and contact details are historical, not current offers. Reader methods are not universal instructions: follow manufacturer guidance, proper supports and safety practices, and consult a qualified professional when needed.

Comments and votes

Have you tried this idea? Mark it helpful and share how it worked in your shop.