Practical ideas from FARM SHOW MagazineSubscribe · Free issue · Send us your shop tip
Subscribe to FARM SHOW
Home / Vol. 21, No. 1 (1997)

James S. Wilson

James S. Wilson, Celeste, Texas

He used a tractor rim off an old “B” Farmall to build a forge for his welding shop.

“I cut the 2-ft. dia., 10-in. deep rim in half around the middle and discarded one half. I welded a 1/4-in. thick steel plate under the remaining half. I lined the inside of the rim with firebrick, sloping inward like a funnel to a 3-in. dia. opening at the bottom. I placed a 3/8-in. thick plate on top of the firebrick and drilled 1/4-in. dia. holes 1/2 in. apart in the plate, like the pattern on a Chinese checkerboard. This allows heat from the coal I burn in the fire box to radi-ate up.

“A 3-in. dia. electric squirrel cage fan blows air into the fire box. I made a metal flapper for the inlet of the squirrel cage to control air flow. The forge mounts on 38-in. tall legs and there’s a door on the bottom to dump the ash.

“I can heat 3/4-in. thick plate steel to red hot in 10 to 15 minutes much more cheaply than I could using an acetylene torch. The only improvement I’d make is to use a bigger squirrel cage, one with a 6 or 8-in. fan, for better efficiency.”

Reproduced from the published FARM SHOW entry. Prices, coupons, availability and contact details are historical, not current offers. Reader methods are not universal instructions: follow manufacturer guidance, proper supports and safety practices, and consult a qualified professional when needed.

Comments and votes

Have you tried this idea? Mark it helpful and share how it worked in your shop.