Practical ideas from FARM SHOW MagazineSubscribe · Free issue · Send us your shop tip
Subscribe to FARM SHOW
Home / Vol. 20, No. 5 (1996)

Roger & Bruce Elliott

Individual tip 3 of 3 from this reader’s published contribution.
Roger & Bruce Elliott, Montrose, Ill.

Another improvement the Elliotts made is a pair of extension cords suspended from the ceiling. One is a 110-volt cable fitted with a standard 3-prong plug and the other is a 220-volt cable fitted with a 50-amp plug to run their Mig welder and plasma cutter. The 50-ft. cords are wound in 8-ft. coils that hang from iron rings that slide back and forth loosely on a 9 ga. steel wire about 1 in. below the ceiling.

Reproduced from the published FARM SHOW entry. Prices, coupons, availability and contact details are historical, not current offers. Reader methods are not universal instructions: follow manufacturer guidance, proper supports and safety practices, and consult a qualified professional when needed.

Comments and votes

Have you tried this idea? Mark it helpful and share how it worked in your shop.