Practical ideas from FARM SHOW MagazineSubscribe · Free issue · Send us your shop tip
Subscribe to FARM SHOW
Home / Vol. 20, No. 5 (1996)

Robert Rufi

Robert Rufi, Monroe, Wis.

“Moving 1,000-lb. big round bales with my early 1950’s vintage Ford 8N loader tractor equipped with old Superior front end loader used to be a lot of work. The tractor had manual steering and the weight of the bales on the front end made it next to impossible to steer.

“I solved the problem by installing power steering on the tractor. I used two junked 3-in. cylinders, one off an old IH 503 combine and the other off an old IH 403 combine. These cylinders have control valves built right into them, making them ideal for using in the power steering unit I patterned after that used on a Ford Jubilee. The cylinders anchor on each side of the tractor on radius arms down by the operator’s feet. The opposite end had a ball swivel that I drilled out so it would fit over the tractor’s tie rod end. I installed a flow control valve on the hydraulic pump driven off the crankshaft that supplies pressure for the steering and loader cylinders.

“The system works like a charm. You can almost spin the steering wheel with one finger, even when there’s a bale on the loader.”

Reproduced from the published FARM SHOW entry. Prices, coupons, availability and contact details are historical, not current offers. Reader methods are not universal instructions: follow manufacturer guidance, proper supports and safety practices, and consult a qualified professional when needed.

Comments and votes

Have you tried this idea? Mark it helpful and share how it worked in your shop.