Roland Schild, Greenfield, Ill., got the idea for this pipe bender after seeing one in a machine shop.
It consists of a couple of Y-shaped metal frames made from heavy strap iron joined at a center hinge point by a heavy pin that can be fitted with different size belt pulleys that do the bending. Schild simply switches pulleys depending on what size bend is needed.
A pair of heavy bolts are inserted on either side of the pulley. A series of holes along the frame lets you reposition them as needed to make various bends. The pipe or rod to be bent is laid alongside the bolts, and then the frame is pulled straight so the pulley moves inward.
Schild mounted the bender on a piece of I-beam mounted solid on a metal door post. The bender handles pipe or rod up to 1/2 in. dia.
Contact: FARM SHOW Followup, Roland Schild, Rt. 1, Box 172, Greenfield, Ill. 62642 (ph 217 363-2150).
Reproduced from the published FARM SHOW entry. Prices, coupons, availability and contact details are historical, not current offers. Reader methods are not universal instructions: follow manufacturer guidance, proper supports and safety practices, and consult a qualified professional when needed.
Comments and votes
Have you tried this idea? Mark it helpful and share how it worked in your shop.