“An inexpensive method of building a high volume air compressor is to use a small compressor and a large volume tank. I use a 300-gal. tank off an old NH3 applicator. These tanks are cheap, fairly readily available, and heavily built. To save shop space, the tank can be placed outside. In the past I used a piston-type automotive air conditioning compressor powered by a 2-hp. motor. But under heavy use these compressors have a limited life since they rely on freon for internal cooling. When used as an air compressor, they eventually overheat. To avoid this problem, I switched to a compressor from an ammonia rather than a freon system. These compressors can be found in old locker and meat processing plants. The compressors have fans and fins for air cooling and are heavily built. For an investment of approximately $150, I now have a compressed air system that handles any air tool.”
Reproduced from the published FARM SHOW entry. Prices, coupons, availability and contact details are historical, not current offers. Reader methods are not universal instructions: follow manufacturer guidance, proper supports and safety practices, and consult a qualified professional when needed.
Comments and votes
Have you tried this idea? Mark it helpful and share how it worked in your shop.