Practical ideas from FARM SHOW MagazineSubscribe · Free issue · Send us your shop tip
Subscribe to FARM SHOW
Home / Vol. 20, No. 3 (1996)

Wayne Hagen

Individual tip 1 of 2 from this reader’s published contribution.
Wayne Hagen, Lake Alma, Sask.

“I’ve designed and built 5 machines for farm shops and machine shop operators. Three of my machines have already been featured in FARM SHOW: a 4-ft. brake and shear combination, a punch and bar shear, and an iron roller. My latest two machines are a 12-in. deep throat punch and a hydraulic tubing bender.

“The deep throat punch has a simple design that’s easy to build and would fit anyone’s budget. I used 1 1/2 in. steel plate for the body and most other parts. For the hydraulic cylinder I used a 30-ton ram built for hydraulic presses. The punch has a foot operated valve to give hands-free operation. It’ll punch a 1-in. dia. hole in 3/8-in. steel plate or a 3/4-in. hole in 1/2-in. plate. It will accept conventional punches so many shapes and sizes can be used.

Reproduced from the published FARM SHOW entry. Prices, coupons, availability and contact details are historical, not current offers. Reader methods are not universal instructions: follow manufacturer guidance, proper supports and safety practices, and consult a qualified professional when needed.

Comments and votes

Have you tried this idea? Mark it helpful and share how it worked in your shop.