Practical ideas from FARM SHOW MagazineSubscribe · Free issue · Send us your shop tip
Subscribe to FARM SHOW
Home / Vol. 20, No. 3 (1996)

Michael Casson

Individual tip 1 of 2 from this reader’s published contribution.
Michael Casson, Chandler, Ind.

“I used an old stainless steel laundry room sink, an old cabinet door, and a 30-gal. steel barrel to make an inexpensive parts washer. The barrel contains cleaning fluid. A pump mounted on an angle iron frame bolted to the bottom of the sink pumps fluid through a hose up into the sink. The cabinet door is used as a lid and is hinged on back so I can flip it up or down. The angle iron frame keeps the sink centered over the barrel. The 2 by 3-ft. sink is big enough to wash engine heads and blocks. A screen in the sink drain filters out big pieces of dirt. Dirty fluid drains out the bottom of the sink and back into the barrel. I change the fluid twice a year.

Reproduced from the published FARM SHOW entry. Prices, coupons, availability and contact details are historical, not current offers. Reader methods are not universal instructions: follow manufacturer guidance, proper supports and safety practices, and consult a qualified professional when needed.

Comments and votes

Have you tried this idea? Mark it helpful and share how it worked in your shop.