Practical ideas from FARM SHOW MagazineSubscribe · Free issue · Send us your shop tip
Subscribe to FARM SHOW
Home / Vol. 20, No. 3 (1996)

Robert Tupper

Individual tip 2 of 2 from this reader’s published contribution.
Robert Tupper, Canton, S.Dak.

“You can make a simple screw slot cleaner out of a hack saw blade. Cut or break off a 4-in. piece of blade and grind one end down to a blunt point. Slip it into the end of a 4-in. long, 3/4-in. dia. piece of wood dowel. Drill 3/32-in. holes through the dowel and blade and put a nail or screw through to hold it in place. This tiny tool works great for cleaning paint, varnish or rust out of screw slots.”

Reproduced from the published FARM SHOW entry. Prices, coupons, availability and contact details are historical, not current offers. Reader methods are not universal instructions: follow manufacturer guidance, proper supports and safety practices, and consult a qualified professional when needed.

Comments and votes

Have you tried this idea? Mark it helpful and share how it worked in your shop.