Practical ideas from FARM SHOW MagazineSubscribe · Free issue · Send us your shop tip
Subscribe to FARM SHOW
Home / Vol. 20, No. 2 (1996)

R. Hiller

R. Hiller, Greeley, Colo.

“Here’s how I start hard-to-start 2 to 8 hp. gas engines. First, I drill a 1/8-in. dia. hole through the air cleaner housing on the engine, making sure the hole is in line with the carburetor intake. Then I make a squirt can using a 1-quart plastic oil bottle that I fit with a metal cap. I weld a small brass tube to the center of the cap - the tube is an ink refill tube from a pen. One good squirt into the engine will get it started. I usually set the plastic can in boiling water before using it to ‘activate’ the gas. You can leave the hole open in the air cleaner as I do, or plug it with a metal screw.”

Reproduced from the published FARM SHOW entry. Prices, coupons, availability and contact details are historical, not current offers. Reader methods are not universal instructions: follow manufacturer guidance, proper supports and safety practices, and consult a qualified professional when needed.

Comments and votes

Have you tried this idea? Mark it helpful and share how it worked in your shop.