Practical ideas from FARM SHOW MagazineSubscribe · Free issue · Send us your shop tip
Subscribe to FARM SHOW
Home / Vol. 20, No. 2 (1996)

John M. Kiminski

Individual tip 1 of 4 from this reader’s published contribution.
John M. Kiminski, North Brookfield, Mass.

“I came up with a way to free up ‘king pins’ and some bearings that would not take grease. What I do is take off the quick tach fitting on the hose of my Porta Powr portable hydraulic power unit and fit it with a grease gun end. Then I use it to apply up to 10,000 lbs. of pressure while wiggling the bearing or king pin till hydraulic oil starts pushing through. I then use my regular grease gun, which pushes the oil out so I can get grease through like normal. When I’m done I put the hydraulic power unit back together and add a bit of oil to it. Works great.

Reproduced from the published FARM SHOW entry. Prices, coupons, availability and contact details are historical, not current offers. Reader methods are not universal instructions: follow manufacturer guidance, proper supports and safety practices, and consult a qualified professional when needed.

Comments and votes

Have you tried this idea? Mark it helpful and share how it worked in your shop.