Practical ideas from FARM SHOW MagazineSubscribe · Free issue · Send us your shop tip
Subscribe to FARM SHOW
Home / Vol. 20, No. 2 (1996)

Charles Sorensen

Charles Sorensen, Corwith, Iowa

“I used galvanized steel pipe, a disk blade, and an old Teflon frying pan to make a portable, telescoping shop light that also doubles as a bolt or tool tray. The light can be adjusted from 4 to 7 ft. high. I welded the bottom of the 1 1/2-in. dia. pipe to the disk blade to make the main stand, then inserted a smaller diameter pipe inside it and mounted a Halogen light at the top of it. I drilled a hole in the side of the 1 1/2-in. dia. pipe and welded a nut onto it, then screwed a bolt that screws against the inside pipe to hold it up.

“I mounted an electric outlet at the bottom of the 1 1/2-in. dia. pipe and use it to power my shop tools. A wire runs from the outlet up inside the pipe to a switch, and from there to the light.

“The pan eliminates the need for a can to throw bolts into. It’s bolted to a steel ring that slides over the 1 1/2-in. dia. pipe. The ring allows me to turn the pan at any angle.”

Reproduced from the published FARM SHOW entry. Prices, coupons, availability and contact details are historical, not current offers. Reader methods are not universal instructions: follow manufacturer guidance, proper supports and safety practices, and consult a qualified professional when needed.

Comments and votes

Have you tried this idea? Mark it helpful and share how it worked in your shop.