Practical ideas from FARM SHOW MagazineSubscribe · Free issue · Send us your shop tip
Subscribe to FARM SHOW
Home / Vol. 50, No. 2 (2026)

Dale Freeman

Dale Freeman, Monroe, Va.
Dale Freeman
Photo: FARM SHOW · Vol. 50, No. 2 (2026) · p. 32

“Moving my auxiliary diesel fuel tank in and out of my truck bed with forks can be tricky. It came with angle-iron pieces at each end and along the sides of the tank. I bolted a piece of 1/8-in. steel plate to the angle irons.

“I attached a piece of heavy-duty angle iron to the front of the steel plate to provide a little more protection when approaching the tank with forks. I also added a double set of 3 by 3-in. tubing under the ends of the plate. The tubing creates plenty of space for my forks to set the tank down in the truck bed. The space is also helpful when I set the tank down on a caster cart for storage in my shed.

“I added some 1/2-in. round stock on the side to retain coiled hose. It’s easy to slip the hose out when pumping fuel, but it keeps it from getting messed up when not in use.

“I picked up a mineral feeder at the farm store and attached it to the top of the tank. It’s a great place to store the fuel pump wiring.”

Reproduced from the published FARM SHOW entry. Prices, coupons, availability and contact details are historical, not current offers. Reader methods are not universal instructions: follow manufacturer guidance, proper supports and safety practices, and consult a qualified professional when needed.

Comments and votes

Have you tried this idea? Mark it helpful and share how it worked in your shop.