Practical ideas from FARM SHOW MagazineSubscribe · Free issue · Send us your shop tip
Subscribe to FARM SHOW
Home / Vol. 49, No. 1 (2025)

Handy Holder For MIG Gun

Featured source: Matt Stewart, Huachuca City, Ariz.
Handy Holder For MIG Gun
Photo: FARM SHOW · Vol. 49, No. 1 (2025) · p. 34

Matt Stewart got the idea for a MIG gun holder from a friend a few years ago. When he decided to make his own, he added a holder for MIG gun pliers. Using pieces of scrap he had lying around, it didn’t cost him anything, but it quickly proved handy to have.

“I started with a rusty, old, vise grip-style C-clamp,” says Stewart.

“For parts, I cut 2-in. lengths of 1 by 1-in. angle iron, Schedule 40 1 7/8-in. O.D. steel tubing and 1/8-in. wall 1 by 1-in. square tubing.”

The idea was to weld the angle iron to one jaw of the C-clamp for a secure attachment to the welding table. To do that, he needed a flat spot on the angle iron.

“I made a few passes on the center of the angle with a hack saw and then filed them down,” he says.

“I tightened the clamp jaw on the flat spot and welded it in place.”

He used a second C-clamp to hold the round tubing to the side of the jaw arm and welded it in place at an angle to accommodate the MIG gun.

“I rearranged the second C-clamp to hold the square tubing in a vertical position on the other side of the jaw arm and spot welded it in place,” says Stewart.

“The holder only took a few minutes of time, but it works great. The MIG gun is held securely, as is the pliers.”

Stewart made a video of the build for his YouTube channel (@mattthescrapwhisperer). It proved popular enough that he later made a second one as a giveaway when his YouTube channel hit 1,000 subscribers.

Contact: FARM SHOW Followup, Matt Stewart, 1215 E. Skyfield Dr., Huachuca City, Ariz. 85616 (ph 360-813-2171; [email protected]).

Reproduced from the published FARM SHOW entry. Prices, coupons, availability and contact details are historical, not current offers. Reader methods are not universal instructions: follow manufacturer guidance, proper supports and safety practices, and consult a qualified professional when needed.

Comments and votes

Have you tried this idea? Mark it helpful and share how it worked in your shop.