
“My air supply tank has a Schrader (or bicycle tire) fitting, and it was constantly jamming or taking forever to fill the portable tank. I remembered an article from FARM SHOW where somebody had a quicker way to go from supply to portable, but I couldn’t find it. After a trip to Harbor Freight and doing a lot of thinking during the middle of the night, I came up with an idea for an air tank assembly to make this work better.
“I used industrial interchange couplings rather than automotive couplings. I took a ball valve, threaded female at both ends, threaded in two quick disconnect fittings, and plugged that assembly in to turn the valve off. I then plugged it into the supply tank, took an air hose and connected it to the other end of the assembly, and plugged it into the destination tank (a portable tank in this case). I opened the valve, and the air went to the destination tank.”
Reproduced from the published FARM SHOW entry. Prices, coupons, availability and contact details are historical, not current offers. Reader methods are not universal instructions: follow manufacturer guidance, proper supports and safety practices, and consult a qualified professional when needed.
Comments and votes
Have you tried this idea? Mark it helpful and share how it worked in your shop.