Practical ideas from FARM SHOW MagazineSubscribe · Free issue · Send us your shop tip
Subscribe to FARM SHOW
Home / Vol. 48, No. 2 (2024)

Tom Mattiuz

Tom Mattiuz, Saint Marys, Penn.
Tom Mattiuz
Photo: FARM SHOW · Vol. 48, No. 2 (2024) · p. 33

“I bought a Deere X390 lawn tractor with a mower and 44-in. snowblower. The blower belt is a bear to install. The instructions state that once the blower is mounted, you raise it to the uppermost level to work the belt on. Who are they trying to fool? There’s no way to release the belt tension. Each time I installed it, I smashed one of my fingers. The old-style snow THROWER had a lever to release the belt tension for easy installation. Not the newer model BLOWERS. To install it this year, I looped a rope around the pulley arm, ran a piece of rebar through the loops in the rope, and pulled it to release the tension. I was by myself, so I couldn’t hold the bar and put the belt on at the same time. So, I had to jury rig a solution (see picture). I used a small pry bar against the frame and held the rebar tight with it. Deere needs to have an older person that has arthritis install their attachment and make sure it’s an easy install.”

Reproduced from the published FARM SHOW entry. Prices, coupons, availability and contact details are historical, not current offers. Reader methods are not universal instructions: follow manufacturer guidance, proper supports and safety practices, and consult a qualified professional when needed.

Comments and votes

Have you tried this idea? Mark it helpful and share how it worked in your shop.