Practical ideas from FARM SHOW MagazineSubscribe · Free issue · Send us your shop tip
Subscribe to FARM SHOW
Home / Vol. 47, No. 6 (2023)

Robert Bauer

Robert Bauer, Hastings, Minn.

“I’ve made a lot of time and labor-saving devices for my shop, including power hose reels and using an old forklift to raise heavy parts to my second-level storage, but the one that really saves my back is my adjustable height shop table. It’s made from an old scissor lift that used to ride on wheels.

“When I built my shop, I made a pit in the concrete floor the size of the lift frame, without the wheels. The pit is deep enough that when the lift is all the way down, the flat tabletop is level with the floor. I can easily slide or roll heavy parts on the table, then raise it to whatever level I need to work at a comfortable height. I raise and lower the table with power from a 12-volt battery.

“This setup only cost me a few hundred dollars, and it was easy to make. It’s way less money than buying a scissor lift table on wheels for several thousand dollars.”

Reproduced from the published FARM SHOW entry. Prices, coupons, availability and contact details are historical, not current offers. Reader methods are not universal instructions: follow manufacturer guidance, proper supports and safety practices, and consult a qualified professional when needed.

Comments and votes

Have you tried this idea? Mark it helpful and share how it worked in your shop.