Practical ideas from FARM SHOW MagazineSubscribe · Free issue · Send us your shop tip
Subscribe to FARM SHOW
Home / Vol. 47, No. 3 (2023)

Dale McLaen

Dale McLaen, Rutland, N.D.

“I started to develop a ragged cough and asthma-like symptoms. I realized they flared up after I used my fairly large sandblaster cabinet.

“It has a factory vacuum system, but I found a fine layer of dust around the outlet on the vacuum motor. I cleaned up everything, made sure the large factory bag-type filter was ok, then rechecked after about an hour of use later.

“Sure enough, an ultra-fine layer of dust had formed again, meaning the most dangerous particles that can cause lung damage were getting blown into the air and all over the shop.

“If you think about the particles that accumulate inside the blaster, such as lead from old paint, rust, metal dust, silica, and ten other kinds of dangerous things, you quickly realize they’re nothing to mess with. If you can find dust with your fingers, it’s also in your lungs.

“A HEPA-type filter might work, but I can’t find anything like it for my blaster. My short-term fix is to wear a full-face mask with replaceable cartridges whenever I use the blaster. I also open the shop doors to ventilate the entire shop when I finish.

“My longer-term fix is to vent the exhaust from the vacuum outdoors. It’s a similar problem to one outlined in a recent Best Buy report about woodworking dust collection systems. Filters in vacuum systems rarely do more than catch the big chunks. Lead made that old paint shine and last, but it’s extremely dangerous when turned into dust.”

Reproduced from the published FARM SHOW entry. Prices, coupons, availability and contact details are historical, not current offers. Reader methods are not universal instructions: follow manufacturer guidance, proper supports and safety practices, and consult a qualified professional when needed.

Comments and votes

Have you tried this idea? Mark it helpful and share how it worked in your shop.