Practical ideas from FARM SHOW MagazineSubscribe · Free issue · Send us your shop tip
Subscribe to FARM SHOW
Home / Vol. 47, No. 2 (2023)

Made-It-Myself Can Storage Rack

Featured source: Anthony Spiering, Powell, Wyo.
Made-It-Myself Can Storage Rack
Photo: FARM SHOW · Vol. 47, No. 2 (2023) · p. 34

Anthony Spiering of Powell, Wyo., has a clever storage solution for aerosol cans in his farm shop. He tends to buy glass cleaner, carburetor cleaner, spray lubricants, and similarly-sized products in bulk for cheaper shipping costs. Not only did this create lots of clutter within the shop, but the lack of organization led him to forget what he’d already bought.

Spiering found inspiration for a better system from the soup can displays at grocery stores. His goal was to create vertical storage where the entire stack would roll down one can after selecting the bottom one.

His rack organizer uses 5-ft. by 10-ft. 1/4-in. thick steel plate to make the surface and back of the workbench. He had a steel company break the sheets to make the tabletop, sloping back, and upper shelf. Once that was done and welded solidly to the frame, he began on the can racks.

“I took some 1/8-in. by 3-in. strap steel and cut pieces about 54 in. long, welding them in a T-shape, similar to what an I-Beam looks like,” he says.

“After this, I welded the T’s to the angled back of the workbench. I spaced them about 8 1/2 in. apart.”

Next, he attempted to design the popup ramp by first placing some flat steel to angle the cans away from the wall and then using 1-in. square tubing to hold them to the tabletop. Within the 13 separate slots, Spiering can store and display well over a hundred cans.

Working with a friend, the entire project took Spiering about 3 days.

“There was a lot of trial and error involved,” he says.

“While the soup rack organizers looked really simple at the store, replicating the right dimensions was a struggle”. The cans themselves were heavy and needed a precise amount of support to ensure they moved through the steel rack smoothly. Make it too tight, and the weight of the stacked cans keeps the bottom one in place so he can’t pull it out. But have things too loose, and cans pop out of the rack and roll on the floor.

He solved this problem in part with two 1-in. by 2-in. square “ears” on the bottom of each rack. These provide enough space to work your fingers in through the bottom to pop out a can while the ears catch the next one and keep it in place.

Interested readers can contact Spiering directly for more details on the exact dimensions of his can rack.

Contact: FARM SHOW Followup, Anthony Spiering, 1168 Rd. 19, Powell, Wyo. 82435 (ph 307-254-2645).

Reproduced from the published FARM SHOW entry. Prices, coupons, availability and contact details are historical, not current offers. Reader methods are not universal instructions: follow manufacturer guidance, proper supports and safety practices, and consult a qualified professional when needed.

Comments and votes

Have you tried this idea? Mark it helpful and share how it worked in your shop.