“My Simplicity bandsaw mill uses tires for the drive wheels on the mill. Sometimes when cutting through knots or hard dense spots on logs, the band blade will tend to pull down, causing wavy cuts. To help eliminate this, I added some small roller bearings to support the blade under the existing bearings. The bearings are mounted so that they don’t turn with the blade all the time. But when the cut tends to cause the blade to travel down, the bearings will hold the blade straight in the cut. The small size lets me cut boards down to 3/4 of an inch thick over the bunks.”
Reproduced from the published FARM SHOW entry. Prices, coupons, availability and contact details are historical, not current offers. Reader methods are not universal instructions: follow manufacturer guidance, proper supports and safety practices, and consult a qualified professional when needed.
Comments and votes
Have you tried this idea? Mark it helpful and share how it worked in your shop.