Practical ideas from FARM SHOW MagazineSubscribe · Free issue · Send us your shop tip
Subscribe to FARM SHOW
Home / Vol. 46, No. 6 (2022)

Frank Peters

Frank Peters, Lacombe, Alta.

“I was changing a bearing on my baler by myself. Seems like I can never find a kid when I need one. The carriage bolts that fit the bearing flange are inserted from inside the baler. Then you mount the bearing flange. As you do that, the bolts inevitably slip back out. What I did was put a tiny O-ring on the threads of each bolt to hold them in position. I could then fit the outer flange and the nuts. The O-rings can just be left in place as the nuts will tighten down normally. Saved a lot of frustration.”

Reproduced from the published FARM SHOW entry. Prices, coupons, availability and contact details are historical, not current offers. Reader methods are not universal instructions: follow manufacturer guidance, proper supports and safety practices, and consult a qualified professional when needed.

Comments and votes

Have you tried this idea? Mark it helpful and share how it worked in your shop.