“I make these turnbuckles to tighten up a run of barbed wire. They cost almost nothing and take only 15 min. to make versus paying $20 for something similar in town. All you need is 5 or 6 in. of threaded rod and 2 in. of light angle iron. I drill a 1/2-in. hole in one side of the angle iron and slide the rod through it. I drill a 1/4-in. hole in the other side for the brace wire to go around the anchor post. Lastly, I weld a large nut to the end of the threaded rod to run the wire through. Lets me tighten up the wire until it has the same tone as the 4th string on my banjo.”
Reproduced from the published FARM SHOW entry. Prices, coupons, availability and contact details are historical, not current offers. Reader methods are not universal instructions: follow manufacturer guidance, proper supports and safety practices, and consult a qualified professional when needed.
Comments and votes
Have you tried this idea? Mark it helpful and share how it worked in your shop.