Practical ideas from FARM SHOW MagazineSubscribe · Free issue · Send us your shop tip
Subscribe to FARM SHOW
Home / Vol. 46, No. 5 (2022)

Mark Yax

Mark Yax, Solon, Ohio
Mark Yax
Photo: FARM SHOW · Vol. 46, No. 5 (2022) · p. 32

“I had an electric stove that I was tossing out. When removing the bottom drawer, I noticed that the stamped steel tub would make a nice drain pan or parts washing tub. I removed the front door panel and cut off the ears that held it on with my angle grinder. The only other thing I had to do was to weld up some small holes. This should work well for changing the oil in some of my equipment as it holds quite a bit. I will also use it for cleaning some larger parts.”

Reproduced from the published FARM SHOW entry. Prices, coupons, availability and contact details are historical, not current offers. Reader methods are not universal instructions: follow manufacturer guidance, proper supports and safety practices, and consult a qualified professional when needed.

Comments and votes

Have you tried this idea? Mark it helpful and share how it worked in your shop.